Qixingyuan supplies PCB conveyor flange rollers in 35/36 and 40/45 series for wet-process transport and edge guidance. The raised flange helps keep PCB or FPC panels aligned as they pass through etching, developing, cleaning, and rinsing equipment. Match the replacement to the shaft size, bore, outside diameter, flange height, panel thickness, conveyor speed, and track geometry.
Engineering plastics are commonly selected for PCB flange rollers because they provide dimensional stability, low-friction contact, and resistance to many wet-process environments. The material grade and bearing insert should be chosen according to the actual chemical, concentration, temperature, load, and wear level. Confirm all dimensions and liquid compatibility before ordering, because the same nominal roller size can use a different bore or flange profile.
PCB conveyor flange rollers guide panel edges and reduce lateral drift in horizontal wet-process lines. They are used in etching, developing, cleaning, rinsing, scrubbing, and other conveyor sections where thin panels may move away from the intended path. Correct flange geometry supports steady transfer and helps reduce edge contact, skewing, and line jams.
Được thành lập vào năm 2011 với tên gọi Bộ phận Kinh doanh Phụ tùng Thiết bị Thâm Quyến Qixing, chúng tôi tập trung vào phụ tùng thiết bị xử lý ướt PCB/LCD và các linh kiện thay thế theo yêu cầu.
Một doanh nghiệp công nghệ cao sở hữu nhiều chứng nhận công nghệ bằng sáng chế quốc gia.
Từ dao khí nén đến bánh răng, vít và con lăn băng tải, chúng tôi cung cấp đầy đủ các vật tư tiêu hao cho hệ thống truyền động và làm sạch.
Giao tiếp nhanh chóng qua WhatsApp và Email cho hoạt động mua sắm quốc tế.